"No Interference" GPS Antenna with Dual SAW High Rejection Filter

Wi-Sys:
pdf data sheetpdf data sheet

Features
  • Very high rejection dual SAW filter
  • Patented high performance dual LNA
  • High gain: 25.5 dB @ 5 V (typ.)
  • Low current: 7.5 mA @ 3.3 V (typ.)
  • 3.1 dB low noise figure
  • 15KV ESD circuit protection
  • Wide voltage input range (2.7 - 5 VDC)
  • Weather proof housing

WS3911-HR: "No Interference" GPS Antenna with Dual SAW High Rejection Filter

The WS3911-HR "No Interference" GPS Antenna with Dual SAW High Rejection Filter has the industry's best out-of-band filter performance.

The WS3911-HR features ESD circuit protection, a patented two-stage low noise amplifier and a dual SAW high rejection filter. It also features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. The WS3911-HR provides the most consistent, clear GPS signal reception while minimizing loss-of-lock in high-RF fields. Housed in a weatherproof magnetic or screw mount enclosure, the WS3911-HP GPS antenna is ideal for most demanding vehicle mounted GPS applications.
Applications
  • Anti-jam / Mission Critical GPS
  • Military Radios and Vehicles
  • Law Enforcement / Public Safety
  • Avionics
  • Fleet Management & Telematics
  • Asset Tracking

Technical Specifications

Environmental Specificationstemperature-40c to +80c operating
-45c to +80c storage
IP67 / Weather proof
Mechanicaldimensions45mm x 51mm x 12mm
2.05" x 2.32" x 0.53"
weight120g (4.2 oz)
attachment methods:Magnetic (5 lb lift-off force) or permanent (pre-threaded for 3 x M2.5 screws)
shockVertical axis 50G
Other axes 30G
vibration3 axis, sweep = 15 min
10 - 200 Hz log sweep: 3G
Antenna Response frequency1575.42 MHz
gain@ 90° 3 dBic
@ 20° -2.0 dBic
polarizationRight Hand Circular
axial ratio@ 90° 4 dB
@ 20° 6 dB
Electrical voltage2.7 - 5 VDC
current7.5 mA @ 3.3VDC
11.5 mA @ 5VDC
ESD circuit protection15K Volts
cable1.5 DS-QEHV Shikoku Cable Co. Ltd.
cable length3 metres (standard)
other lengths optional
cable loss1.3 dB/m typical
connectorSMA standard
other connectors optional
LNA Specifications frequency1572.5 - 1578 MHz
output impedance50 Ohm
VSWR1.5:1 max (at connector)
gain25 dB @ 3.3VDC: (typical)
25.5 dB @ 5VDC: (typical)
noise figure3.1 dB