Low Noise OEM GPS Antenna with Built-in MCX Connector

Wi-Sys: WS405X/WS406X - Embedded GPS Antenna (top)Wi-Sys: WS405X/WS406X - Embedded GPS Antenna (bottom)
  • Available with and without internal ground plane
  • 28 dB gain @ 3.3 VDC
  • Extremely low noise figure: 0.8 dB
  • Excellent out-of-band signal rejection
  • Built in MCX connector
  • High performance patented LNA

WS4051/WS4061

The WS4051/WS4061 low noise OEM GPS Antenna series with built-in connector is unparalleled in quality and performance, and ideal for embedded OEM applications. The WS4051/WS4061 series features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects, as well as a Low Noise Amplifier and a SAW filter that enable these antennas to provide a consistent, clear signal while minimizing loss-of-lock when GPS conditions are less than ideal. Both models come equipped with a MCX connector. The WS4051 comes in a very compact 25 mm square package and the WS4061 comes with a 45.2 mm dia. mini-ground plane.

Designed for maximum GPS performance, the connectorised WS4051/61 antennas' advanced circuitry integrates a SAW filter and low-noise amplifier to ensure a reliable and clear signal for the GPS receiver even in difficult conditions. Where other GPS antennas fail, the WS4051/61 antennas' superior out-of-band rejection and low noise characteristics can provide a reliable signal, which can be critical for improving acquisition times and minimizing outages
  • Portable Telematics
  • Automotive Navigation Systems
  • Fleet Management & Telematics Systems
  • Marine Navigation Systems
  • Asset Tracking Equipment
  • Military Radios and In-Vehicle-Systems
  • Law Enforcement Radios and In-Vehicle-Systems

Technical Specifications

Environmental Specificationstemperature-40c to +80c operating
-45c to +80c storage
humidity95% max (non condensing)
MechanicalWS405125mmx25mmx6.7mm
0.98" x 0.98" x 0.26"
(no ground plane)
WS406145.2mm diameter x 6.7mm
1.78" diameter x 0.26"
(with ground plane)
shockVertical axis 50G
Other axes 30G
vibration3 axis, sweep = 15 min
10 - 200 Hz log sweep: 3G
Antenna Response frequency1575.42 MHz
gain@ 90° 3 dBic
@ 20° -2.0 dBic
polarizationRight Hand Circular
axial ratio@ 90° 4 dB
@ 20° 6 dB
Electrical voltage2.7 - 5.0 VDC
current7.5 mA @ 3.3VDC (typical)
connectorMCX
cable accessoryCustom cable assembly is available,
please contact factory.
LNA Specifications frequency1572.5 - 1578 MHz
output impedance50 Ohm
VSWR1.5:1 max (at connector)
gain@ 3.3VDC: 28 dB (typical)
@ 5.0VDC: 28.5 dB (typical)
noise figure0.8 dB
out-of-band rejection + 15 MHz: 10 dB / - 15 MHz: 30 dB
+ 20 MHz: 20 dB / - 20 MHz: 30 dB
+ 40 MHz: 40 dB / - 40 MHz: 40 dB