Supporting multiple Bluetooth profiles such as SPP and HID and simple UART hardware interface, the RN-41-SM / RN-42-SM is simple to integrate into an embedded system or simply connect to an existing device. The RN-41/RN-42 is FCC and Bluetooth SIG certified making it a complete embedded Bluetooth solution.

The RN-41/RN-42 modules support multiple Bluetooth profiles (SPP, DUN and HCI) makig it the perfect solution for adding Bluetooth wireless capability to existing products without redesign, saving you significant time and money.

• Board contains:
  • RN-41 (Class 1) or RN-42 (Class 2) module
  • Status LEDs for connection and data transfer
  • Jumpers for setting Bluetooth modes (Master or Slave), Baud Rate (9600 or 115K) and Factory Reset

• Socket module with TTL UART and RS-232 interface
• Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module
• Bluetooth v2.1+EDR support
• UART supports baud rates from 1200 to 3Mbps
• SPP data rates: 240 kpbs (slave), 300 kbps (master)
• HCI data rates: 1.5 Mbps sustained, 3.0 Mbps burst in HCI mode
• Embedded Bluetooth stack profiles included (requires no host stack): GAP, SDP, RFCOMM and L2CAP with SPP, DUN and HCI profiles
• RS232 on board with power enable on I/O pin
• Class 1 high power amplifier (RN-41 only) with on board ceramic RF chip antenna
• Certifications: FCC, ICS, EN, CE
• Environmentally Friendly: RoHS compliant