The Wi.232EUR-R, (868-870 MHz) module combines a state-of-the art low power wireless transceiver with a powerful multipoint-to-multipoint protocol controller to form a transparent wireless communication solution capable of replacing wires in any RS-232/422/485 application. It is footprint compatible with the Wi.232DTS-R module (902-928 MHz), allowing products to be designed for both the US and European markets.

With a 120dB link budget and very low power operating modes, the Wi.232EUR-R module is excellent for AMR, RFID, Home Automation, and any other application requiring long range (<1,600ft LOS) and long battery life.

The module is designed to be totally transparent. No special addressing or formatting of data is required. Data is validated using an internally generated CRC-16 and encoded using a proprietary algorithm. Multiple modules can operate on the same channel because of the built-in carrier-sense-multiple-access (CSMA) protocol.

The transceiver operates in two modes: narrow-band and wide-band. In both modes, transmitter output power is programmable from 0-15dBm. In NB mode the maximum data rate is 9.6 kbit/sec. There are 6 available channels in NB mode. In WB mode, the maximum data rate is 76.170 kbit/sec. There are 2 available channels in WB mode.

In either mode, the Wi.232EUR-R module is an excellent alternative to expensive and power-hungry frequency hopping modules. With 114dB link margin at the highest data rate, and 120dB link budget at the lowest data rate, the Wi.232EUR-R will work farther and faster than any module in its class. Because the module does not require frequency hopping, synchronization is very fast, allowing long duty cycles and very good battery power performance .