6000U Surface Acoustic Wave (SAW) Touchscreen USB Controller
6000U Touchscreen USB Controller Specification:
Environmental Conditions
Temperature
Operating Range：0°C ~ 65°C
Storage Range：-25°C ~ 85°C
Humidity

Operating Range：10%~90% RH (no dew falls)
Storage Range：10%~90% RH (no dew falls)
Altitude
Operating Altitude：10,000 feet (3048m)
Shock and Vibration
Three axis sine wave, 50 Hz to 2kHz, 1G, 2 minutes / Octave with dwell on resonances.
Flammability
The PCB substrate and all plastic components, such as headers and connectors are rated UL 94 V0.
Electrical Characteristics
Supply Voltage
+5VDC (+4.75V to +5.25V)
Supply Curren

85 mA, typical at +5V DC
Max . current : 150 m
Electrostatic Protection

Per EN 61000-4-2, 1995 : Meets Level 4
(15 kV air / 8 kV contact discharges)
Interface

USB 1.1 (Full Speed) Plug and play compatible

Touch Resolution
4096 x 4096, size independent
Conversion Time
Approximately 15ms per coordinates set
Reliability

MTBF greater than 300,000 hours
per MIL-HDBK-217-F2 using the part stress calculation method for ground benign environment with an ambient temperature of 25°C

Mechanical Characteristics
Construction
Four-layer surface-mount design with internal ground plane for EMI suppression.
Dimensions

PCB87 x 56 x 12mm
Refer to 6000U Drawing

Standard Cables

Standard external USB cable connecting the SAW USB controller with the computer USB port:

Connectors
USB Output

Connector : P2
1X4,2.0mm Female connector on board for
connection with USB port.

Touchscreen

connector : P3
A dual row by six position header with 0.635 mm square pins
spaced on 2.54 centers for connection with touch panel.