6000S Surface Acoustic Wave (SAW) Touchscreen Serial Controller |
|
| 6000SSurface Acoustic Wave (SAW) Touchscreen Serial Controller Specification: |
Environmental Conditions |
|
Operating Range：0°C ~ 65°C
Storage Range：-25°C ~ 85°C |
Humidity |
Operating Range：10%~90% RH (no dew falls)
Storage Range：10%~90% RH (no dew falls) | Altitude |
Operating Altitude：10,000 feet (3048m) |
Shock and Vibration |
Three axis sine wave, 50 Hz to 2kHz, 1G, 2 minutes / Octave with dwell on resonances. |
Flammability |
The PCB substrate and all plastic components, such as headers and connectors are rated UL 94 V0. |
|
|
| |
|
Electrical Characteristics |
|
+5VDC (+4.75V to +5.25V) |
Supply Curren |
85 mA, typical at +5V DC
Max . current : 150mA |
Electrostatic Protection |
Per EN 61000-4-2, 1995 : Meets Level 4
(15 kV air / 8 kV contact discharges) |
Interface |
Serial RS-232. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
Hardware handshaking : RTS / CTS |
Baud Rate |
9600 |
Touch Resolution |
4096 x 4096, size independent |
Conversion Time |
Approximately 15ms per coordinates set |
Reliability |
MTBF greater than 300,000 hours
per MIL-HDBK-217-F2 using the part stress calculation method for ground benign environment with an ambient temperature of 25°C |
|
| |
Mechanical Characteristics |
|
Four-layer surface-mount design with internal ground plane for EMI suppression. |
Dimensions |
PCB87 x 56 x 12mm
Refer to 6000S Drawing |
Standard Cables |
Standard external RS-232 cable connecting the SAW serial controller with the computer serial port : |
Connectors Serial |
connector P2
1X5,2.0mm 5 Pin Female Type connector on board for connection with RS-232 port. |
Touchscreen |
connector : P4
A dual row by six position header with 0.635 mm square pins
spaced on 2.54 centers for connection with touch panel. |
|
| |
