4200S 4-Wire Resistive Touchscreen Serial Controller
4200S 4-Wire Resistive Serial Controller Specification:
Environmental Conditions
Temperature
Operating Range：0°C ~ 65°C
Storage Range：-25°C ~ 85°C
Humidity

Operating Range：10%~90% RH (no dew falls)
Storage Range：10%~90% RH (no dew falls)
Altitude
Operating Altitude：10,000 feet (3048m)
Shock and Vibration
Three axis sine wave, 50 Hz to 2kHz, 1G, 2 minutes / Octave with dwell on resonances.
Flammability
The PCB substrate and all plastic components, such as headers and connectors are rated UL 94 V0.
 
Electrical Characteristics
Supply Voltage
+5V DC ( ±10%)
Power Consumption

Operating : 80~90mA
Non-operating : 120~130 mA
Max. current : 140mA
Min. current : 80mA
Expend Power

124 mA
Interface

Serial RS-232

Baud Rate
9600
Electrostatic Protection

Per EN 61000-4-2, 1995 : Meets Level 4
(15 kV air / 8 kV contact discharges)

Touch Resolution

4096 x 4096

Conversion Time
Approximately 10 ms per coordinates set.
 
Mechanical Characteristics
Dimensions

PCB board outside dimension : 84 x 53 mm..
Mounting hole located 4mm horizontally and vertically inside each corner.View 4200S Drawing.

Standard Cables

Standard external RS-232 cable connecting the controller with the computer serial port.

Connectors

Serial Connector P2
1X5,2.0mm Female Type connector on board for connection with RS-232 port.

Serial Connector P4 : RS232
2x5 male header with pins on 2.54mm centers for connection with RS-232 port.

Touchscreen Connector P5 : J4W
1x4 male header with pins on 2.54mm centers for connection with the touch panel.

Power connector P3 : JPOW
1x2 header with pins on 2.54mm centers.