4000S 4-Wire Resistive Touchscreen Serial Controller |
|
| 4000S-4-Wire Resistive Serial Controller Specification: |
Environmental Conditions |
|
Operating Range：0°C ~ 65°C
Storage Range：-25°C ~ 85°C |
Humidity |
Operating Range：10%~90% RH (no dew falls)
Storage Range：10%~90% RH (no dew falls) |
Altitude |
Operating Altitude：10,000 feet (3048m) |
Shock and Vibration |
Three axis sine wave, 50 Hz to 2kHz, 1G, 2 minutes / Octave with dwell on resonances. |
Flammability |
The PCB substrate and all plastic components, such as headers and connectors are rated UL 94 V0. |
|
|
| |
|
Electrical Characteristics |
|
+5V DC ( ±10%) |
Power Consumption |
Operating : 80~90mA
Non-operating : 120~130 mA
Max. current : 140mA
Min. current : 80mA |
Expend Power |
124 mA |
Interface |
Serial RS-232 |
Baud Rate |
9600 |
Electrostatic Protection |
Per EN 61000-4-2, 1995 : Meets Level 4
(15 kV air / 8 kV contact discharges) |
Touch Resolution |
4096 x 4096 |
Conversion Time |
Approximately 10 ms per coordinates set. |
|
| |
Mechanical Characteristics |
Dimensions |
PCB board outside dimension : 22.5 x 55 mm.
Mounting hole located 4mm horizontally and vertically inside each corner.View 4000S Drawing. |
Standard Cables |
Standard external RS-232 cable connecting the controller with the computer serial port. |
Connectors |
Serial Connector P2
1X5,2.0mm Female Type connector on board for connection with RS-232 port.
Touchscreen Connector P3 :
1x4 male header with pins on 2.54mm centers for connection with the touch panel. |
|
| |
