| CPU | 1.6GHz Intel Atom™ N270 processor with a 533MHz FSB |
| System Chipset | Intel 945GSE+ICH7M |
| BIOS | AMI BIOS |
| System Memory | One 200-pin 400/533MHz DDR2 SDRAM SO-DIMM supported (system max. 2GB) |
| Ethernet | One Realtek RTL8111CP PCIe GbE controller |
| I/O Interface | 1 x RS-232
1 x LPT
1 x IDE
1 x RS-232/422/485
2 x SATA
1 x CF Type II
1 x PS/2 KB/MS
6 x USB2.0 |
| Digital I/O | 8-bit digital I/O (4-bit input, 4-bit output) |
| Super I/O | ITE IT8718F |
| Infrared | 1 x Infrared Interface by pin header |
| Audio | Support by audio kit (AC'97 & HD)
5.1 channel AC'97 audio kit with Realtek ALC655 codec
7.1 channel HD audio kit with Realtek ALC883 codec supports dual audio streams |
| Display Interfaces | Intel Graphics Media Accelerator 950
VGA integrated in Intel 945GSE
18-bit dual-channel LVDS integrated in Intel 945GSE |
| Watchdog Timer | Software Programmable support 1~255 sec. System reset |
| Power Supply | AT/ATX support
Power input: 9-28V Wide Range Voltage Input |
| Power Consumption | 12V@1.49A(Intel Atom™ N270 with 2GB DDR2) |
| Temperature | Operation: 0°C ~ 60°C (32°F ~ 140°F) |
| Humidity | Operation: 5% ~95% non-condensing |
| Dimensions | EPIC 165mm x 115mmGW:700g / NW:320g |
| Weight | GW:700g / NW:320g |
| CAN Communication Interface | 2 x CAN-bus interface
PCI to CAN-bus CPLD: Xilinx XC95288XL-10TQG144C
CAN-bus controller: Philips SJA1000T
CAN-bus transceiver: Philips PCA82C251
Signal Support: CAN_H, CAN_L
Isolated Protection: 2500Vrms on CAN side
Programmable transfer rate: up to 1Mbps
Drive support: Windows XP, Windows XP Embedded |
Features
Specifications
Ordering Information
Packing List