XBee&reg & XBee-PRO&reg DigiMesh™ 2.4 RF Modules

Dynamic peer-to-peer DigiMesh protocol with sleeping routers
No configuration needed for out-of-the-box RF communications
2.4 GHz globally deployable frequency
Self-healing and discovery for network stability
Multiple antenna options for both low power XBee and extended range XBee-PRO
Product datasheet

XBee & XBee-PRO DigiMesh 2.4 embedded RF modules utilize the peer-to-peer DigiMesh protocol in 2.4 GHz for global deployments. This innovative mesh protocol offers users added network stability through self-healing, self-discovery, and dense network operation. With support for sleeping routers, DigiMesh is ideal for power sensitive applications relying upon batteries or power harvesting technology for power.

Models

Development Kits	North America:	International:
North American/International (except Japan) DigiMesh 2.4 Development Kit w/ 2 XBee and 2 XBee-PRO modules	XB24-DMDK	XB24-DMDK
Japan DigiMesh 2.4 Development Kit w/ 2 XBee and 2 XBee-PRO modules		XB24-DMDK-WJ
XBee & XBee-PRO DigiMesh 2.4 Embedded RF Modules	North America:	International:
XBee DigiMesh 2.4 low power module w/ U.FL connector	XB24-DMUIT-250	XB24-DMUIT-250
XBee DigiMesh 2.4 low power module w/ RPSMA connector	XB24-DMSIT-250	XB24-DMSIT-250
XBee DigiMesh 2.4 low power module w/ wire antenna	XB24-DMWIT-250	XB24-DMWIT-250
XBee DigiMesh 2.4 low power module w/ chip antenna	XB24-DMCIT-250	XB24-DMCIT-250
XBee-PRO DigiMesh 2.4 extended range module w/ RPSMA connector	XBP24-DMSIT-250	XBP24-DMSIT-250J
XBee-PRO DigiMesh 2.4 extended range module w/ wire antenna	XBP24-DMWIT-250	XBP24-DMWIT-250J
XBee-PRO DigiMesh 2.4 extended range module w/ U.FL connector	XBP24-DMUIT-250	XBP24-DMUIT-250J
XBee-PRO DigiMesh 2.4 extended range module w/ chip antenna	XBP24-DMCIT-250	XBP24-DMCIT-250J

Specs

Platform	XBee DigiMesh™ 2.4	XBee-PRO DigiMesh™ 2.4	XBee-PRO DigiMesh™ 2.4 (Int'l)
Performance
RF Data Rate	250 Kbps
Indoor/Urban Range	100 ft (30 m)	300 ft (90 m)	200 ft (60 m)
Outdoor/RF Line-of-Sight Range	300 ft (90 m)	1 mile (1.6 km)	2500 ft (750 m)
Transmit Power	1 mW (+0 dBm)	63 mW (+18 dBm)	10 mW (+10 dBm)
Receiver Sensitivity (1% PER)	-92 dBm	-100 dBm
Features
Serial Data Interface	3.3V CMOS serial UART
Configuration Method	API or AT commands
Frequency Band	2.4 GHz ISM
Interference Immunity	DSSS
Serial Data Rate	Up to 115.2 Kbps
ADC Inputs	Coming in future firmware releases
Digital I/O	Coming in future firmware releases
Antenna Options	Wired whip, chip antenna, U.FL connector, RPSMA connector
Networking & Security
Encryption	Coming in future firmware releases
Reliable Packet Delivery	Retries/Acknowledgments
Addressing Options	PAN ID, channel, 64-bit address
Channels	16	12
Power Requirements
Supply Voltage	2.8 – 3.4VDC
Peak Current	45 mA	250 mA (Wire, Chip, U.FL), 340 mA (RPSMA)	150 mA (Wire, Chip, U.FL), 180 mA (RPSMA)
Receive Current	50 mA	55 mA
Power-Down Current
Regulatory Approvals
FCC (USA)	Yes
IC (Canada)	Yes
ETSI (Europe)	Yes
C-TICK (Australia)	Yes
Telec (Japan)	Yes	No	Yes