XBee and XBee-PRO ZB SMT

Product Image
  • Interoperability with ZigBee devices from other vendors*
  • Firmware upgrades via UART, SPI or over the air
  • Advanced configuration options available via simple AT or API commands
  • SMT form factor with side Castellations for easy soldering
  • Industry leading sleep current of sub 1uA
  • Product datasheet

XBee and XBee-PRO ZB embedded SMT RF modules provide cost-effective wireless connectivity to end-point devices in ZigBee mesh networks. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors*. They require no configuration or additional development; users can have their network up and running in a matter of minutes.

Models

Development Kits North America: International:
XBee ZigBee RF SMT Module Development Kit
XK-Z11-S
 XK-Z11-S-W
XBee ZigBee RF SMT Module Development Kit, Australia
Not applicable
 XK-Z11-S-WA
XBee Modules North America: International:
XBee ZB SMT Non-Programmable (PCB Antenna)
XB24CZ7PIS-004
 XB24CZ7PIS-004
XBee ZB SMT Non-Programmable (U.FL Antenna)
XB24CZ7UIS-004
 XB24CZ7UIS-004
XBee ZB SMT Non-Programmable (RF Pad Antenna)
XB24CZ7RIS-004
 XB24CZ7RIS-004
XBee-PRO Modules North America: International:
XBee-PRO ZB SMT Non-Programmable (PCB Antenna)
XBP24CZ7PIS-004
 XBP24CZ7PIS-004
XBee-PRO ZB SMT Non-Programmable (RF Pad Antenna)
XBP24CZ7RIS-004
 XBP24CZ7RIS-004
XBee-PRO ZB SMT Non-Programmable (U.FL Antenna)
XBP24CZ7UIS-004
 XBP24CZ7UIS-004

Specs

Platform XBee ZB SMT XBee-PRO ZB SMT
Standard Programmable Standard Programmable
Performance
Data Rate RF 250 Kbps, Serial up to 1 Mbps
Indoor/Urban Range 200 ft (60 m) 300 ft (90 m)
Outdoor/RF Line-of-Sight Range 4000 ft (1200 m) 2 miles (3200 m)
Transmit Power 3.1 mW (5 dBm) / 6.3 mW(+8 dBm) boost mode 63 mW (+18 dBm) / Int'l 10 mW (+10 dBm)
Receiver Sensitivity (1% PER) -100 dBm / -102 dBm boost mode -102 dBm
Features
Serial Data Interface UART, SPI
Configuration Method API or AT commands, local or over-the-air
Frequency Band ISM 2.4 GHz
Interference Immunity DSSS (Direct Sequence Spread Spectrum)
ADC Inputs (4) 10-bit ADC inputs
Digital I/O 15
Antenna Options PCB (embeded), U.FL and RF PAD
Operating Temperature -40° C to +85° C
Dimensions (L x W) and Weight 0.87 in x 1.33 in x 0.12 in (2.20 cm x 3.40 cm x 0.30 cm); 1.40 oz (40.00g)
Programmability
Memory N/A 32 KB Flash / 2 KB RAM N/A 32 KB Flash / 2 KB RAM
CUP/Clock Speed N/A HCS08 / up to 50.33 MHz N/A HCS08 / up to 50.33 MHz
Networking and Security
Encryption 128-bit AES
Reliable Packet Delivery Retries/Acknowledgments
IDs PAN ID and addresses, cluster IDs and endpoints (optional)
Channels 16 channels 15 channels 16 channels 15 channels
Power Requirements
Supply Voltage 2.1 to 3.6V 2.7 to 3.6V
Transmit Current 33 mA @ 3.3 VDC /
45 mA boost mode		 47 mA @ 3.3 VDC /
59 mA boost mode		 100 mA @ 3.3 VDC 114 mA @ 3.3 VDC
Receive Current 28 mA @ 3.3 VDC /
31 mA boost mode		 42 mA @ 3.3 VDC /
45 mA boost mode		 31 mA @ 3.3 VDC 45 mA @ 3.3 VDC
Power-Down Current 1.5 uA @ 25° C 1.5 uA @ 25° C
Regulatory Approvals
FCC, IC (North America) Yes
ETSI (Europe) Yes No
C-TICK (Australia) Pending
TELEC (Japan) Pending No

ZigBee Mesh


Documentation