XBee & XBee-PRO ZB Adapters
- ZigBee wireless connectivity for all types of end-point devices
- Compatible with ConnectPort™ X gateways & XBee modules
- Multiple interface options available for a variety of devices
- Small form factor for easy handling and installation
- Low-power XBee and extended-range XBee-PRO
- Product datasheet
Models
| XBee ZB Low Power Adapters | North America: | International: | |
|
XBee ZB RS-232 adapter, internal wire antenna (3 - 6V)
|
XA-Z16-CS2RL |
XA-Z16-CS2RL |
|
|
XBee ZB RS-485 adapter, internal wire antenna (3 - 6V)
|
XA-Z16-CS3RL |
XA-Z16-CS3RL |
|
|
XBee ZB Digital I/O adapter, internal wire antenna (3 - 6V)
|
XA-Z16-CS4RL |
XA-Z16-CS4RL |
|
|
XBee ZB Analog I/O adapter, internal wire antenna (3 - 6V)
|
XA-Z16-CS5RL |
XA-Z16-CS5RL |
|
| XBee-PRO ZB Extended Range Adapters | North America: | International: | |
|
XBee-PRO ZB USB adapter, internal wire antenna
|
XA-Z14-CE1P-A |
XA-Z14-CE1P-W |
|
|
XBee-PRO ZB RS-232 adapter, external RPSMA Antenna (Included) (3 - 6V)
|
XA-Z14-CS2P-A |
XA-Z14-CS2P-W |
|
|
XBee-PRO ZB RS-485 adapter, external RPSMA Antenna (Included) (3 - 6V)
|
XA-Z14-CS3P-A |
XA-Z14-CS3P-W |
|
|
XBee-PRO ZB Digital I/O adapter, external RPSMA antenna (included) (3 - 6V)
|
XA-Z14-CS4P-A |
XA-Z14-CS4P-W |
|
|
XBee-PRO ZB Analog I/O adapter, external RPSMA Antenna (Included) (3 - 6V)
|
XA-Z14-CS5P-A |
XA-Z14-CS5P-W |
|
| 868 Extended-Range XBee-PRO Adapters | North America: | International: | |
|
XBee USB adapter, internal wire antenna
|
Not applicable |
XA-P81-CE1P-W |
|
|
XBee RS-232 adapter, external RPSMA antenna (Included) (3 - 6V)
|
Not applicable |
XA-P81-CS2P-W |
|
|
XBee RS-485 adapter, external RPSMA antenna (Included) (3 - 6V)
|
Not applicable |
XA-P81-CS3P-W |
|
|
XBee Digital I/O adapter, external RPSMA antenna (Included) (3 - 6V)
|
Not applicable |
XA-P81-CS4P-W |
|
|
XBee Analog I/O adapter, external RPSMA Antenna (Included) (3 - 6V)
|
Not applicable |
XA-P81-CS5P-W |
|
| XBee ZB Wall Router | North America: | International: | |
|
XBee-PRO ZB Wall Router, US Power Plug
|
XR-Z14-CW1P1 |
Not applicable |
|
|
XBee-PRO ZB Wall Router, EU Power Plug
|
Not applicable |
XR-Z14-CW1P2 |
|
|
XBee-PRO ZB Wall Router, UK Power Plug
|
Not applicable |
XR-Z14-CW1P3 |
|
|
XBee-PRO ZB Wall Router, Australia Power Plug
|
Not applicable |
XR-Z14-CW1P4 |
|
|
XBee-PRO ZB Wall Router - Japan power plug
|
Not applicable |
XR-Z14-CW1P5 |
|
| XStick ZB USB Adapter | North America: | International: | |
|
XStick USB Adapter, ZB
|
XU-Z11 |
XU-Z11 |
Specs
| Platform | XBee ZB | XBee-PRO ZB |
| Performance | ||
| RF Data Rate | 250 kbps | |
| Indoor/Urban Range | Up to 133 ft (40 m) | Up to 300 ft (90 m) / 200 ft (60 m) Int'l variant |
| Outdoor/RF Line-of-Sight Range | Up to 400 ft (120 m) | Up to 1 mile (1.6 km) / 2500 ft (750 m) Int'l variant |
| Transmit Power | 1.25 mW (+1 dBm) / 2 mW (+3 dBm) boost mode | 50 mW (+17 dBm) / 10 mW (+10 dBm) Int'l version |
| Receiver Sensitivity (1% PER) |
-96 dBm in boost mode | -102 dBm |
| Features | ||
| Antenna Type | XBee ZB Adapters: Internal Antenna; XBee-PRO ZB Adapters: External RPSMA Antenna | |
| Frequency Band | 2.4 GHz | |
| Serial Data Interface | RS-232 DB9M/DTE or RS-485 (6-position wire terminal block) switch selectable between RS-422 half-duplex, RS-422 full duplex and RS-485 |
|
| USB Data Interface | USB 2.0 Full Speed (with ESD protection); connects to host via captive 1-meter cable | |
| Analog IO (AIO) & Digital IO (DIO) |
6-position wire terminal block; Analog IO: 0 - 10V, 4 - 20 mA, or +/- 2VDC Differential; Digital IO: Digital Input or sinking driver output |
|
| NEMA 4X/IP66 Enclosure (Optional) | Fully protected from water, dust and dirt: Internal metal mounting plate; 1 cable inlet with water-tight grommet Dimensions: 7.50 in x 4.50 in x 3.25 in (19.05 cm x 11.43 cm x 8.25 cm) | |
| Networking & Security | ||
| Network Topologies | Point-to-point, Point-to-multipoint, Mesh | |
| Number of Channels | 16 | 14 |
| Spread Spectrum Type | Direct Sequence Spread Spectrum | |
| Filtration Options | PAN ID, 64-bit MAC, channel | |
| Addressing | 65,000 available addresses for each channel | |
| Other | ||
| LEDs | Power: Glows green when external power is supplied (not active when battery powered to limit power drain) Associate: Blinks when unit is connected and associated on an RF network | |
| Controls | Device reset (internal push button); Identification (internal push button) – relays ID to gateway | |
| Dimensions (L x W x H) & Weight | RS-232, RS-485, AIO, DIO models: 3.60 in x 1.90 in x 1.20 in (9.14 cm x 4.82 cm x 3.04 cm) 2.29 oz (64.92 g) USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm) 1.60 oz (45.36 g) | |
| Operating Temperature | -40° C to +70° C | |
| Power Requirements | ||
| Input Voltage | 3.7-6VDC and 9-30VDC options | |
| Power Supply (RS-232, RS-485, AIO, DIO) | 120VAC/240VAC to 5VDC power supply, internal lithium battery pack, or external 6-cell D battery holder (all sold separately) |
|
| Power Consumption | USB: 70 mA (normal operation) / 200 uA (suspend mode) |
USB: 70 mA Rx and 250 mA Tx (normal operation) / 200 uA (suspend mode) |
| USB Model | Bus powered (+5V) | |
| Regulatory Approvals | ||
| Emissions | FCC Part 15.247, IC, ETSI/CE, Telec, EN55022 (Class B) | |
| Safety | UL60950, CAN/CSA C22.2 No.60950 | |
| RoHS | Yes | |