Digi m10™
- Global LEO satellite coverage (no blockage)
- Simple serial interface for host communication
- Extremely compact module form factor
- Very low transmit and receive power consumption
- Industrial operating temperature and shock/vibration
- Product brief
The Digi m10 satellite modem provides worldwide satellite data transmit and receive capabilities for a wide variety of asset-tracking and industrial remote communications. Operating on the ORBCOMM low-earth orbit (LEO) satellite network, it is designed to enable Machine-to-Machine (M2M) communication with virtually unlimited global coverage and no blockage.
Models
| Development Kits | North America: | International: | |
Digi JumpStart Kit for the Digi m10 Satellite Modem
|
DG-M10-KIT |
DG-M10-KIT |
|
| Modules | North America: | International: | |
|
Digi m10 Satellite Modem, single-pack, without antenna
|
DG-M10 |
DG-M10 |
Specs
| Host Interface | |
| Header | 14-pin socket, 1 mm pitch (Samtec P/N MLE-107-01-G-DV-K) |
| Serial Port | UART (3.3V TTL), 2-wire, with modem power on/ off control option through DTR signal |
| Wake Trigger | Satellite Available (SA), Data Available (DA) |
| Satellite Communications | |
| Antenna Connector | MMCX male connector (50 Ω) |
| Minimum Detectable Signal | -120 dBm (typical) |
| Transmit Power | 5W nominal |
| Frequencies | TX: 148-150.05 MHz RX: 137-138 MHz |
| Power Requirements | |
| Input Voltage | +9 to 18VDC |
| Transmit Current | 1.5 A max @ +12VDC |
| Receive Current | 60 mA max @ +12VDC |
| Mechanical | |
| Dimensions (L x W x H) | 2.95 in x 1.81 in x 0.52 in (7.49 cm x 4.60 cm x 1.32 cm) |
| Environmental | |
| Operating Temperature | -40° C to +85° C (-40° F to +185° F) |
| Relative Humidity | 0% to 95% (non-condensing) |
| Shock (Operational) | Exceeds SAE J1455 levels |
| Vibration (Operational) | Exceeds SAE J1455 levels |
| Radiated Emissions | EN300 832, EN301-721 |
| Regulatory Approvals | US (FCC), EU (CE), Australia/New Zealand (C-Tick), Canada (IC) - pending, Japan (Telec) - pending |