SBC-iGLX Board

Mature product, not for new designs.

With front panel

Bottom view

With enclosure
SBC-iGLX Highlights
Single Board Computer implemented by the combination of a CM-iGLX module and SB-iGLX baseboard
Available in two form-factors:
- Standard PC/104+
- PC/104+ with front panel
AMD Geode LX CPU @ 500 MHz, 512 MB SDRAM, 512 MB Flash Disk
SXGA graphics controller with connectors for a LCD panel and CRT monitor
WLAN / WiFi 802.11g Interface
Video input and encoder
PCI and ISA bus expansions in PC/104+ format
Two serial ports with RS232 / RS485 / RS422 / TTL driver options
Host USB ports, including keyboard & mouse support
Touchscreen interface
Hard disk interface
Sound I/O
Single or dual 100 Mbps Ethernet ports
CardBus slots
CANbus interface
RTC with lithium battery
Switched power supply for telecom and automotive applications, 3.3V to 48V operating range
Also available with enclosure, implementing complete tiny PC
Note: some of above specified features are optional
The SBC-iGLX is a standard PC/104+ compliant, single board computer. It is implemented by a CM-iGLX module providing most of the functions, and a SB-iGLX carrier board providing connectors and several additional functions. The rich feature set of the SBC-iGLX is customizable according to the price / performance targets of the user's application.

The unique mechanical design of the SBC-iGLX allows selecting between two popular form factors: either the standard PC/104+ with headers, or an extended PC/104+ with front panel connectors.

The SBC-iGLX contains PC/104+ expansion connectors which open it to the wide range of standard peripheral cards. Furthermore, the SBC-iGLX contains an electrical interface and slots for CardBus extension cards, which may be inserted and secured in the slot with no additional mechanical means, extending the system with capabilities such as a larger solid state disk, GPS or GSM modem.

For more information, see Developer Resources page.


Block Diagram

SBC-iGLX Features

The "SB Option" column specifies the P/N code of the SB-iGLX carrier board required to have the particular feature. The "CM Option" column specifies the P/N code of the CM-iGLX required to have the particular feature. SBC-iGLX content is the combination of features provided by the attached CM-iGLX and the features implemented on the SB-iGLX. To have a particular feature, both the CM and SB options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.

Feature Specification SB
Option		 CM
Option
CPU
SDRAM
Flash Disk		 See Feature List of CM-iGLX module
COM-A Rx/Tx only, RS-232 levels, RJ11 or DB9 connector + +
COM-B Rx/Tx only, RS-232/422/485 levels, 100-mil header X +
IDE UDMA ATA-100 interface. 40-pin FPC connector. + +
Ethernet One or two 10/100 Mb Ethernet ports, using Realtek RTL8139:
- 1st port from CoM
- 2nd port from the baseboard
RJ-45 connector and activity LED's provided in two options:
- From baseboard's front panel
- Through FPC and optional extension module
+
E2

F1
+
E
E
TFT Panel TFT (digital RGB) panel interface. 51-pos FPC connector for direct interface to certain TFT panels + +
LVDS Panel LVDS panel interface, through 100-mil header L +
CRT Monitor Analog RGB interface for CRT and FP monitors, through DB15 on the front panel or through FPC and optional module + +
Video Input Using SAA7113 video input processor V +
GPIO up to 8 lines, on common 100-mil header + +
PCMCIA & CardBus Slots with card guides, based on PCI1520 controller. Supports PCMCIA (16-bit) or CardBus (32-bit) standards, and card types I, II and III C1
C2		 +
+
Host USB Three USB Host ports, 480 Mbps. Header for Type-A cable/ connector. Two ports on front panel + +
Sound I/O
Touchscreen		 Wolfson WM9715L controller supporting distinct audio and touchscreen functions. Header for standard cable/connectors for Microphone (mono), Line input and Speakers (stereo). Touchscreen controller for resistive panels, pins on 100-mil header. + AT
PC104 Standard PC/104 connector and signals. Implemented using IT8888 PCI-ISA bridge P +
PC104+ PCI bus through standard PC/104+ connector R +
RTC Battery Real time clock operated from on-board lithium battery + +
CAN Bus CAN Bus controller and driver with galvanic isolation and DC separation W +

Electrical, Mechanical and Environmental Specifications

Supply Voltage High efficiency switched power supply. Support of sleep mode.
Two supply options:
- Regulated 3.3V or 5.0V (3.3V valid only if module doesn't contain "A" option)
- Unregulated 12V to 48V, for telecom and automotive applications
Power Consumption 3W to 6W in full activity, depending on CPU speed and selected features
Below 200 mW in sleep mode
Dimensions Without front panel - 96 x 91 mm
With front panel - 111 x 91 mm
Height ranges from 10 mm to 22 mm, depending on the connectors assembled. The height specified includes the CM-iGLX module.
Operation temp (case)
Commercial: 0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C. Click for availability note
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz
MTBF > 100,000 hours

For more information see:
- SB-iGLX Reference Guide
- Developer Resources