SBC-A510 Board New Product !

SBC-A510 Highlights
Single board computer implemented by the combination of a CM-A510 module and a SB-A510 baseboard. Micro-ATX form factor.
Marvell Armada 510 SoC @1000MHz
1GB DDR3
512MB NAND flash
VMeta video decode sub-system @500MHz with H.264, MPEG-4 and MPEG-2 support
Integrated GPU with 2D/3D graphics acceleration and OpenGL-ES support
WLAN / WiFi 802.11b/g/n interface
1920 x 1080 graphics controller with interfaces for LVDS, RGB, DVI and VGA monitors
2 x 1000 BaseT Ethernet ports
SATA hard-drive interface
4 x USB2 high-speed host ports
PCI Express and PCI extension interfaces
MMC / SD / SDIO socket
Sound codec with stereo output, line input and S/PDIF output support
Touchscreen interface
Serial ports, GPIOâ€s
7V - 17V DC power supply, 3 - 8 watt
RTC with lithium back-up battery
Note: some of above specified features are optional

The SBC-A510 is a micro-ATX compliant, single board computer. It is implemented with a CM-A510 module providing most of the functions, and a SB-A510 carrier board providing standard connectors and additional peripherals. The rich feature set of the SBC-A510 is customizable according to the price / performance targets of the user's application.

The SBC-A510 features expansion connectors, that open it to a wide range of standard peripheral cards. Wide input range switched power supply is compatible with requirements for telecom and automotive applications.

For more information, see the Developer Resources page.


Block Diagram

SBC-A510 Features

SB-A510 does not have assembly options. The "CM Option" column specifies the P/N code of CM-A510 required to have the particular feature. "+" means that the feature is always available, regardless of P/N code.

Feature

Specification

CM
Option

CPU
SDRAM
Flash Disk
2D / 3D graphics
Video acceleration

See Feature List of CM-A510 module

COM-A

Partial modem controls, RS-232, ultra mini serial conn.

+

COM-B

Rx/Tx only, 3.3V levels, 100-mil header

+

COM-C

Partial modem controls, 3.3V levels, 100-mil header

+
Gigabit Ethernet One or two CM-A510 1000 BaseT Ethernet ports.
RJ-45 connectors and activity LED's.		 Ex
Hard disk SATA-II interface, standard SATA connector +
LCD Panel TFT panel support. 40-pos FPC connector for direct interface to certain TFT panels +
VGA Analog VGA interface. DB-15 connector +

DVI

DVI monitor support, HDMI connector

+

LVDS

4 pair LVDS panel interface, 100-mil header

+
USB 2.0 host Two USB 2.0 host ports, 480 Mbps, type-A connectors
Additional two USB 2.0 high speed port, 480 Mbps, type-A connectors		 U2
U4

PCI Express

Mini PCI Express x1 slot

+

PCI

Single PCI slot, configurable 3.3V or 5V voltage level
Note: only one extension slot is functional at a time: PCI or PCI Express

+

WiFi

WiFi interface, including on-board antenna connector, provided on CM-A510

W

MMC / SD / SDIO

MMC / SD / SDIO support (including SDHC up to 32GB). Standard full-size SD socket.

+

Camera

Direct camera sensor support. 40-pos FPC connector.

+

GPIO

12 lines, 100-mil header.

+

Touch Panel

TSC2046 touchscreen controller. Interface to LCD panel.

I

Sound I/O

I2S compliant audio codec, line input and speakers (stereo) jacks

A

RTC Battery

Real time clock on CM-A510, supplied by back-up lithium battery on SB-A510

+

Electrical, Mechanical and Environmental Specifications

Supply Voltage High efficiency switched power supply.
Unregulated 7.5 to 17 volt input
Power Consumption 3W to 8W in full activity, depending on CPU speed and selected features
Dimensions 170 mm (L) x 170 mm (W) x 35 mm (H)
Weight 200 gram
Operation temp (case)
Commercial: 0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C. Click for availability note
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz
MTBF > 100,000 hours

For more information see:
- SB-A510 Reference Guide
- Developer Resources