CM-iAM Computer-On-Module
|
|
|
|
CM-iAM Top |
CM-iAM Bottom |
| CM-iAM Highlights | |||||||||||||||||||||||||||||||
|
The CM-iAM packs up-to-date year 2009 technologies into the most compact, lightweight PC-on-module available in the market. Its on-board resources suffice to smoothly run operating systems such as Linux, Windows XP and Windows 7, on credit-card sized board capable running on small battery. Board's specifications, in addition to its low cost, make it an ideal building block for any embedded application. The feature set of the CM-iAM comprises a 32-bit X86-compatible CPU, DDR2, Flash Disk and vital computing peripherals. For embedded applications, the CM-iAM provides a variety of display interfaces, PCIexpress bus, two 1000Mbit Ethernet ports, serial port, general purpose I/O lines and many other essential functions. The user interface is supported by an enhanced graphics controller, USB interface for keyboard / mouse and Audio system. See O/S Support Coverage Map For more information, see Developer Resources page Also see other Atom-based products available from CompuLab |
||||||||||||||||||||||||||||||
|
|
|
Block Diagram

CM-iAM Features
"Option" column
specifies the configuration code required to have the particular feature.
"+" means that the feature is available always.
CPU, Memory and Busses
|
Feature |
Specifications |
Option |
|
CPU |
Intel Atom Processor: Z550 - 2.0GHz, or Z530 - 1.6GHz / 533MHz FSB, or Z510 - 1.1GHz / 400MHz FSB. L2-512KB (dynamic sizing), L1- 32KB IC, 24KB DC. Intel Deep Power Down (C6) technology support |
C |
|
DRAM |
512 / 1024 / 2048 MB DDR2, 400 / 533 MHz, 64-bit |
D |
|
BIOS Flash |
1 MB, on-board reprogrammable |
+ |
|
Flash Disk |
1 - 4 GB, more in future. Up to 10 MB/s transfer rate. |
N |
|
External Busses |
PCIexpress, LPC |
+ |
|
PCIexpress bus |
PCI Express Base
Specification, Revision 1.0a. One or two lanes. |
+ |
|
LPC bus |
Host, 33 MHz, Intel LPC v1.0 compatible |
+ |
Peripherals
|
Feature |
Specifications |
Option |
|
Graphics |
Resolution up to 1920 x 1080 x 32 bpp frame buffer in system memory, 2D, 3D graphics accelerator and multimedia accelerator optimized for HD video. |
+ |
|
Display Interface |
LCD – 18 bpp parallel
RGB for TFT panels |
L |
|
USB |
6 Host USB 2.0 ports, 480 Mbps, EHCI / UHCI compliant |
+ |
|
Serial Port |
UART's, full serial port with modem controls, RS232 levels |
S |
|
GPIO |
6 lines dedicated + 2
lines shared |
+ |
|
Hard Disk Interf. |
SATA-II, using Marvell 88SA8052 |
Y |
|
Ethernet |
Two 1000 Mb/s ports, Activity LED's. Using Realtek RTL8111 controllers. |
E |
|
Audio |
IDT 92HD83 codec, HD audio interface, stereo microphone and line inputs, 60 mW output for 32 Ohm headphones / active speakers, 5.1 channel SPDIF output. |
A |
|
RTC |
Real Time Clock, powered by external lithium battery |
+ |
|
SDIO |
One 4-bit and one 8-bit SDIO ports |
+ |
|
Watchdog |
Wide range programmable watchdog timer |
+ |
Electrical, Mechanical and Environmental Specifications
|
Supply Voltage |
5 volt |
||||||
|
Active power consumption |
4 - 6 W, depending on configuration and CPU speed |
||||||
|
Dimensions |
65 x 75 x 8 mm |
||||||
|
Weight |
35 gram |
||||||
|
MTBF |
> 100,000 hours |
||||||
|
Operation temperature (case) |
|
||||||
|
Storage temperature |
-40o to 85o C |
||||||
|
Relative humidity |
10% to
90% (operation) |
||||||
|
Shock |
50G / 20 ms |
||||||
|
Vibration |
20G / 0 - 600 Hz |
||||||
|
Connectors |
2 x 140 pin, 0.6 mm. Insertion / removal up to 50 cycles |
For more information see:
- CM-iAM
Reference Guide
- Developer Resources

