CM-X300 Top

CM-X300 Bottom

The small size and low power consumption of the CM-X300 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications. The CM-X300 delivers a price / performance ratio significantly better than that of any other platform.

The feature set of the CM-X300 module combines a 32-bit CPU, DDR, Flash Disk and vital computing peripherals. For embedded applications, the CM-X300 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions.

Targeting the handheld application market as well, the module provides integrated WLAN (WiFi) and Bluetooth interfaces to implement industry standard wireless connectivity. Integrated battery charging and management enables easy integration in battery-powered mobile devices.

The standardized CAMI ("CompuLab's Aggregated Module Interface") connectors of the CM-X300 module allow interchangeability with other Computer-On-Module's available from CompuLab, enabling the flexibility required in a dynamic market where application requirements can change rapidly.

See O/S Support Coverage Map

For more information, see
Developer Resources page

Feature

Specifications

Option

Graphics Controller

8/16 bit color, TFT / STN, frame buffer in CPU SRAM or system DDR
Resolution: up to 800 x 480 x 16 without restrictions, and up to 1024 x 1024 with some restrictions about overlays, BPP and pixel clock.

+

Camera Interface

Direct camera sensor support, max resolution 2560 x 2048, pixel clock up to 52MHz. Available only with PXA310 CPU.

C624M

Hardware acceleration

Supports up to D1 decode and encode performance for codecs including H.264, MPEG-4, H.263, MPEG-2, RealVideo and Microsoft WMV9.
Hardware scaling, rotation and other raster graphics operations.
* Implemented by PXA310 CPU

Serial Ports
(UARTs)

Up to 3 UART ports, 16550 compatible, max 921 kbps
COM-A - RS232, Rx / Tx
COM-C - TTL, full modem controls (not available with C624M option)
COM-D - TTL, partial modem controls

+
C624M
+

General Purpose I/O

42 dedicated lines (32 I2C-controlled + 10 memory-mapped) plus additional lines shared with other functions. Can also be used as interrupt inputs.

+

Keyboard & mouse

USB, keypad or redirection from COM port

+

Ethernet

Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's

E

Audio codec

Wolfson W9712L, AC97 interface, mono microphone input, stereo line input and 25 mW output for active speakers

AT

Touchscreen ctrl.

A part of the W9712L codec chip. Supports resistive touch panels.

AT

RTC

Real Time Clock, powered by external lithium battery

R

WiFi
Interface

Implements 802.11b/g wireless connectivity standard
Supports Node to Access Point and Multi-Node (w/o access point) methods of connection. (but cannot act as Access Point)
Marvell 88W8686 802.11b/g chipset.
On-board ceramic chip antenna and connector for external antenna.

W

Bluetooth

Bluetooth V2.0+EDR system. CSR BlueCore4-ROM chipset, 2.4GHz band, up to 3Mbps. On-board ceramic chip antenna and connector for external antenna.
Bluetooth and WiFi interfaces are always assembled together, and therefore are specified by the same assembling option.

W