Toll Free 877-BRAEMAC | (877) 272-3622
HYPER-BT

HYPER-BT

Description

Downloads Downloads      
BIOS
QIG
User Manual
Driver
Features Features      
1. PICO-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
2. 12V only single voltage design for AT/ATX power by DC power jack
3. VGA and iDP support dual display
4. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specifications Specifications      
CPU Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS AMI UEFI BIOS
System Memory One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Ethernet LAN: Intel® I211-AT PCIe controller
I/O Interface 2 x RS-232 (by pin header)
1 x SATA 3Gb/s with 5V SATA power connector
1 x USB 3.0 (on rear I/O)
3 x USB 2.0 (1 on rear I/O, 2 by pin header)
Super I/O Fintek F81866
Audio Realtek ALC662 HD codec supports 5.1 channel
Display Interfaces Dual independent display
1 x VGA (up to 2560x1600@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60Hz)
Watchdog Timer Software programmable, support 1~255 sec. system reset
Power Supply 12V DC power input only, AT/ATX supported
1 x External DC power jack
Power Consumption This email address is being protected from spambots. You need JavaScript enabled to view it. (Intel® Celeron® J1900 CPU, 1 x 4GB 1333 MHz DDR3 memory)
Graphic Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1 OpenGL 4.2 and OpenCL 1.2
Operating Temperature -20°C ~ 60°C
Storage Temperature -30°C ~ 70°C
Humidity Operating: 5% ~ 95%, non-condensing
Dimensions 100mm x 72mm
Weight GW:600g / NW:250g
Front Panel 1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
Fan Connector 1 x 4-pin system fan connector
LAN LED 1 x 2-pin (1x2) header

Specifications